Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
⚠️ California Residents
Warning!
This product contains chemicals known to the State of California to cause cancer, birth defects, or
other reproductive harm. Please consult our safety guidelines and always use personal protective
equipment when handling this material.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B1357-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B1477-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B16125-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B18184-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B2413-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B2612-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B2615-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B2818-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B2824-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B2835-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B21022-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B21026-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.
Galvanized Steel Beams are A36 hot-rolled mild steel beams that have been coated with zinc through a galvanizing process. This provides corrosion protection for up to 30 years at a lower cost than stainless steel, while maintaining similar strength. A1 Industrial Supply offers galvanized beams in both Wide Flange and Standard I-Beam shapes. Beams are available in pre-cut lengths, full mill lengths, or can be hot-dipped to meet your specifications. Galvanized beams can be cut, machined, or welded using regular steel-working methods, but proper ventilation is essential when heating. Saw-cut ends and any drilled or welded areas should be treated with a cold galvanizing compound for maximum protection. Note that some sizes may have a 3/4" hole from the galvanizing process.
B21226-G
Custom Cut Length
Custom cut tolerances = plus / minus 1/16 in.
Call Us for Mitering and Large Quantities.
NOTICE: Custom Cut material is non-returnable and not cancelable
once processing begins. Custom cutting may require additional processing time.